MECO CLAMP-ON TRMS power meter for critical power audits and system maintenance

MECO Clamp-On TRMS Power Meter (Model: 3510PHW-AUTO) is a state-of-the-art Versatile Instrument using Micro Controller Technology and has various functions that would be ideal for an inspector/service engineer to carry out vigilance checks, surveys, audits and periodic visits for checking at industrial and consumers end.

To check current drawn in motors and compressors with MAX/MIN/REC in temperature mode to assess efficiency, test run/start capacitors, analyse temperature data with the aid of the time stamp, check for energised circuits, capture motor inrush current readings, determine peak power demand periods and electrical audit of heating, ventilation, and air conditioning systems are the main applications for this metre.

Key features:

• Check the 3P Phase Sequence
• 4 Digit LCD, 9999 Counts, Autoranging
• Data Hold and Auto Power Off
• Dual Display KW+HP, KW+PF, KW+KVAR, KVA+Ph. Angle, V+A, A+Hz, and V+Hz
• A cable of Diameter up to 43mm or a busbar up to 65mm by 16mm

The measurements can be done without disconnecting the loads and in a very short interval of time. The procedure for measurement is Clamping on Busbar, taking Voltage from the same phase it will display (Dual) Parameters including Horse Power (800HP), Power Factor, Phase Angel, TRMS Current (1000A), AC/DC Voltage (600V), TRUE Power (600KW), Apparent Power (600KVA), Reactive Power (600KVAR) Resistance (999.9KΩ & 99.99MΩ), Diode, Capacitance, Temperature & Frequency.

For details, please visit our website at www.mecoinst.com.

Email: sales@mecoinst.com