Measuring power quality for a brighter future

KUSAM-MECO, an ISO 9001-2015 certified company, has introduced Model KM-2300, a new Class “A” Power Quality Analyzer. This Power Quality Analyzer has Auto Power Off and LCD Backlight Display functions along with safety features such as CAT III 1000V/CAT IV 600V, and meets the standards IEC610191, and IEC61000-4-30A Class. It can be easily operated to resolve the power quality problem and can be used in Single-phase 2W / Single-phase 3W / 3-phase 3W / 3-phase 4W system. It displays run charts, bar charts, vector graphics, waveforms, event lists, readings, and a 32G memory card for long-term measuring data storage. It has a USB port to connect to the PC, analyses the data/screenshots copied by the U-disk, and supports LAN port to enable remote control and transfer of measuring data. It also supports Wi-Fi and GPS communication.

It measures voltage range (0–1000Vrms), current range (1–3000Arms), frequency range (42.5–57.5Hz and 51–69Hz), and harmonics range (0–50). It can also measure active power range (1.0–20M Ohm), apparent power range (1.0–20MOhm), reactive power range (1.0–20MOhm), power factor range (0–1), energy (0kWh–200GWh), and DIPS and SWELLS range (0–200 percent for Vrms/Arms) with programmable threshold in percentage of nominal voltage. Event detection, based upon half-cycle RMS voltage, captures dips, swells, interruptions, and rapid voltage changes. This model has a data logger function, a system monitor (record time up to 7 days and record event number >10000), and an adapter input of AC 220V (1±10%), 50Hz (1±5%), ≤ 10VA.

It is also supplied with a voltage test lead, alligator clips, a power adaptor, power cord, hang strap, software CD, and user manual.

Kusam Electrical Industries Ltd
G-17, Bharat Industrial Estate, T.J. Road,
Sewree (W), Mumbai – 400015, India.
Tel.: 022-24124540/24181649/2775066
Email: sales@kusam-meco.co.in
Website: www.kusamelectrical.com